Torayca A512-X02N3 Toray性能：

PPS具有機械強度高、耐高溫、高阻燃、耐化學藥品性能強等優點;具有硬而脆、結晶度高、難燃、熱穩定性好、機械強度較高、電性能優良等優點。 是工程塑料中耐熱性較好的品種之一，熱變形溫度一般大于260度、抗化學性?xún)H次于聚四氟乙烯，流動性?xún)H次于尼龍。還具有成型收縮率小（約0.08%），吸水率低（約0.02%），防火性好、耐震動疲乏性好等優點。

Torayca A512-X02N3

Toray Resin Company PPS

Torayca A512-X02N3 is a Polyphenylene Sulfide (PPS) product filled with 10% carbon fiber. It is available in Asia Pacific, Europe, or North America.... 

Torayca A512-X02N3 Toray介紹：

TORELINA PPS Resin

Toray PPS resin is a thermal engineering plastic. Types of PPS resin include both the cross linked and linear type.

Toray engages in total production from base polymers to compounds, offering a wide variety of grades.

Features

Heat resistant

Outstanding long-term heat resistance properties (UL temperature index 200-240°C, UL File No. E41797).

Dimensional stability

Minimum molding contraction rate and coefficient of linear thermal expansion with low moisture absorption means outstanding dimensional stability even at high temperature and high humidity.

Chemical resistance

Outstanding chemical resistance on a par with fluoroethylene resin.

Mechanical properties

The resins offer high strength and high rigidity with minimum decline in characteristics at high temperatures. Outstanding anti-fatigue and anti-creep properties.

Flame retardant

Confirms with UL94V-0 without inclusion of flame retardant agents (UL File No. E41797).

Electrical properties

Offers outstanding electrical properties at high temperature, high humidity and high frequencies.

Molding properties

Outstanding fluidity allows extrusion molding on a level with standard engineering plastics.

Remarks for Handling

Safety Precautions

Refer to the Material Safety data sheet for TORELINA before use.

Small amount of hazardous gases which may irritate eyes, nose and throat may be released. Use adequate local exhaust ventilation during drying and molding.

Sweep up and dispose of spilled resin to eliminate slipping hazard.

Don't pile bags too high in order to avoid injury caused by falling of the product.

Care in Handling

Be certain to pre-dry before using TORELINA under following condition.

Drying condition : 3hrs at 130°C (actual temperature) using a hot-air dryer.

This bag consists of an inner bag (PE) and outer bag (paper) that can be separated with ease. The design makes it easy to recycle the materials.

Torayca A512-X02N3 Toray展示：

上一篇：

下一篇：Panlite AM-1300 TEIJIN-PC,耐沖擊性